Free Shipping for Order Over 75$


Your Cart is Empty


Portable CUT50 Air Inverter Plasma Cutter Welder High Efficiency Plasma Cutting Cutter Machine

product badges

Grab your Discounted Portable CUT50 Air Inverter Plasma Cutter Welder High Efficiency Plasma Cutting Cutter Machine while the store LAUNCH DISCOUNT is on. This is absolutely a great gift!

ORDER NOW because these are FLYING off our shelves! 


Portable CUT50 Air Inverter Plasma Cutter Welder High Efficiency Plasma Cutting Cutter Machine


Air Inverter Plasma Cutter Welder using two-valve control, to improve the torch electrodes and conductive mouth, using pull plasma formed to enhance the power arid as a result of pressure drop, from arc of instability, improved electromagnetic interference place more stringent requirements. Greatly reduced High-frequency high-voltage discharge produced by electromagnetic interference, environmental protection and human design to reduce the harm to the human body.

*The inverter power is the power that first changes 50/60HZ working frequency to high frequency (as high as 100KHz) with high power factor V-MOSFET, and then step down the voltage and rectification current, inverter power supply generates powerful DC welding current through PWM technology. Because inverter technology of switch power is used, dimensions and weigh of main transformer has reduced substantially and efficiency by 30%.


Feature as below:




Save-energy and no noise

High cutting speed

Cutting smoothly and no polish demands

1.   Cutting Machine can be used widely. It is suitable for cutting stainless steel, alloy steel, mild steel, copper and other color metal materials.  

2.Cutting capacity higher in cutting speed compare with the same cutting machine.

3.MOSFET inverter and precision constant current feedback control technology, soft switch, DC output.

4. Wide working voltage range, strong adaptability to electricity power grid, high ability of interference resistance, automatic voltage compensation, stable cutting current and steady arc.

5. Intensive arc, high cutting speed, narrow and smooth kerf, continuous current regulation, little distortion for work-piece, safety and reliable for operation.

6. Waterproof, shield from electric shock and corrosion-resisting.

Plasma cutters work by sending a pressurized gas, such as air, through a small channel. In the center of this channel, you'll find a negatively charged electrode. The electrode is at the center, and the nozzle is just below it. The swirl ring causes the plasma to turn rapidly as it passes. When you apply power to the negative electrode, and you touch the tip of the nozzle to the metal, the connection creates a circuit. A powerful spark is generated between the electrode and the metal. As the inert gas passes through the channel, the spark heats the gas until it reaches the fourth state of matter. This reaction creates a stream of directed plasma, approximately 30,000 F (16,649 C) or more and moving at 20,000 feet per second (6,096 m/sec), that reduces metal to vapor and molten slag.

The plasma itself conducts electrical current. The cycle of creating the arc is continuous as long as power is supplied to the electrode and the plasma stays in contact with the metal that is being cut. The cutter nozzle has a second set of channels. These channels release a constant flow of shielding gas around the cutting area. The pressure of this gas flow effectively controls the radius of the plasma beam. NOTE! This machine is designed to use only compressed air as the "gas"


A. Voltage Regulation


The Automatic Voltage Compensation circuit prevents voltage load from exceeding maximum in
accordance with the main technical data sheet and shortening the life of the machine.

B. Thermal Protection

The thermal protection circuits will engage if unit exceeds duty cycle. This will cause the machine to stop working. The indicator will be lit on the front of the machine. The fan will most likely continue to run until it cools down. When it reaches an acceptable temperature, it will operate again.

C. Duty Cycle

Duty cycle is the percentage of on time (measured in minutes) in a 10-minute period in which the machine can be operated continually, in an environment of a specified temperature.
Exceeding duty cycle ratings will cause the thermal overload protection circuit to become energized and shut down output until the unit cools to normal operating temperature. Continual exceeding of duty cycle ratings can cause damage to the machine. 



Parameter specification:




Power supply voltage

Single phase 220v±10%(without plug)

Power supply Capacity


No-load voltage


Current range


Duty cycle(%)


Arc striking


Power factor


Protection class


Insulation class




Cutting thickness




















Package Included:

  • 1 x Plasma Cutter
  • 1 x Cutting Gun
  • 1 x Grounding Clamp
  • 1 x Pressure Reducing Valve
  • 3 x Cutting Accessories
  • 2 x Throat Hoop
  • 2 x Connect The Gas Head
  • 1 x Hose
  • 1x Instructions
  • Some accessories


Input Voltage: 220V
Rated Current: 50Amp
Usage: air plusma cutter
Dimensions: /



ClickADD TO CARTto Order Yours Now!

Satisfaction Guaranteed With Every Order. All prices are listed in USD.

Shipping Info:

- Estimated Delivery Time: US 7-15 Days; Worldwide 15-30 Days.



We truly believe we make some of the most innovative products in the world, and we want to make sure we back that up with a risk-free ironclad 30 day guarantee.

If you don't have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.

Buying items online can be a daunting task, so we want you to realize that there is absolute ZERO risk in buying something and trying it out. If you don't like it, no hard feelings we'll make it right.

We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance.

product badges