Grab your Discounted Circular Saw Blade Grinder sharpener Machine Heavy Duty Mill Grind Carbide while the store LAUNCH DISCOUNT is on. This is absolutely a great gift!
ORDER NOW because these are FLYING off our shelves!
Circular Saw Blade Grinder sharpener Machine Heavy Duty Mill Grind Carbide
Net Weight: 66.14lbs (30kg)
Running Speed: 2850rpm
Adjusting Angle Of The Wheel: +-20°
Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
Working Diameter: 80-700mm
Grinding Wheel Size: 4.92" (125mm)
Bore Size Of Grinding Wheel: 1.26" (32mm)
Sanding Wheel Dimensions: 4.92" X 0.39" X 1.26"X0.2" X 0.08" (125 X 10 X 32x5x2mm)
Product Dimension: 30.3"X16.93"X11.81" (770 X 430 X 300mm)
Package Dimension: 16.93"X16.93"X13.58" (430 X 430 X 345mm)
The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. It's also suitable to grinde other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality.
This item can shapen all the round saw blade, such as Skil saw. It adopts multi angle of swing, three dimensional slide structures to be in adaptation to the grinding of hard alloy saw blades with many specifications and purposes, which enables the grinding mill to maintain high accuracy and easy operation on any condition.
Circular carbide saw blade are widely used for cutting aluminum, wood and plastic materials. MF-126 type grinding machine is used for sharpening many sizes and types circular carbide saw blade. If you change the sanding wheel it can also sharp other common saw blade. It is a necessary assistant machine for cutting aluminum, wood and plastic materials.
Method of operation:
First, loosing the fascia, then adjust the angle of grinding blade and fasten.
Second, adjusting of center axle.
Rotating the center axle to the grinding blade.
Pushing the center axle to the right.
Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
Rotating the rotation table to ensure the angle of grinding blade.
The cross angle between the grinding surface and work surface is about 5.
Third, adjusting of positioning assembly.
Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia.
Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
The machine should be set in a dry, clean, steady and parallel place.
Release the round plat and then adjust the saw blade angle.
Check all parts that need locks before operation.
After the machine runs well then you can start the work.
Take off the electricity after work finishing.
Inform the factory before you change the machines.
1.base 2.box body 3.end cover 4.rotatary base 5.rotary table base 6.rotary table
7.slide base 8.slide disc 9.table 10.guide nut base 11.guide screw 12.slide block
13.frame 14.board 15.positioning board 16.safe cover 17.press board 18.adjusting bolt
19.upright post 20.long bolt 21.short bolt 22.long handle 23.short handle 24.positioning pin
25.mat cover 26.diamond wheel 27.cover 28.motor 29.rear stuck disc 30.fore stuck disc
31.big pin 32.small pin 33.hand wheel 34.round handle 35.turret handle 36.earth foot
37.adjusting bolt base 38.fastening handle 39.switch 40.screw 41.lirnit pin 42.washe
The machine structure is strong and it can work on max diameter 700mm.
The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel.
The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face.
This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.
Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc.
Steel chassis construction.
Grinding wheel angle control with large aluminum knob.
Will hold each blade head position by a position lock.
Extra 2 blade hole adapter.
X axis feed wheel, stable and very sharp grinding.
Rotary angle mark.
ORDERS NAME DESCRIPTION QT
1 Main Machine 1 Set
2 Sanding Wheel 125*10*32*5*2mm 1Tablet
3 Saw Centering 22,30,25 Each 1 Set
4 Saw Centering 40,25.4 Each 1 Set
5 Allen Wrench 5mm,Each 1 Set
6 Cross 4*100 1Set
7 Open-end Wrench 12*14 1Set
8 Manual 1
9 Certificate 1
10 Packing List 1
Type: Hand Tool Parts
Adjusting Angle Of The Wheel: ±20 Degrees
Working Diameter: 80-700mm
Running Speed: 2850rpm
Grinding Wheel Size: 4.92 INCH (125mm)
Bore Size Of Grinding Wheel: 1.26 INCH (32mm)
Wheel Size: 125mm
THIS PRODUCT IS A LIMITED PRODUCTION, AND IS NOT AVAILABLE IN STORES. WILL SELL OUT FAST!
ClickADD TO CARTto Order Yours Now!
Satisfaction Guaranteed With Every Order. All prices are listed in USD.
- Estimated Delivery Time: US 10-25 Days; Worldwide 15-30 Days.
We truly believe we make some of the most innovative products in the world, and we want to make sure we back that up with a risk-free ironclad 30 day guarantee.
If you don't have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.
Buying items online can be a daunting task, so we want you to realize that there is absolute ZERO risk in buying something and trying it out. If you don't like it, no hard feelings we'll make it right.
We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance.